Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SIBELSOUND
3.2. USE OF THE EQUIPMENT
To switch on the unit, press the ON/OFF button (A) on the lower part of the screen. During start-up, the unit performs a self-check
process for all connected accessories and for calibration. If a problem is detected, a warning screen appears with the non-connected
accessories and/or the last calibration date.
MAIN SCREEN
a
Date and time setting and indication
b
Identifier for the current patient and access to editing
of the patient's details
c
Ethernet connection indicator
d
Screen brightness setting
e
Battery / power supply indicator and selection of the
type of battery
f
Continual / Pulsating tone
g
Pure / Warble Tone (FM)
h
Masking level selection and indicator
i
Selection of the ear to be checked, Right (R) / Left (L)
j
Intensity indicator
k
Frequency indicator
Main screen items can be customized so that the unit always starts up with the same configuration (please, refer to
section
3.5 EQUIPMENT
CONFIGURATION).
The main screen allows users to directly and immediately perform a test. When pressing the Sound Application button (D),
the audiometer will emit the selected tone, in the selected mode and ear. On the center of the screen, the symbol
to indicate that the signal is being applied to the patient. To change the signal application mode to Inverted Mode, press the
and
D
buttons simultaneously. Press again to deactivate Inverted Mode.
520-800-MUM · Rev 1.01
DUO
· User's manual
a
g
f
j
EN 12
c
d
b
h
i
k
will appear
e
C
Capítulos
Tabla de contenido
