Tool Description; Tool Composition; Technical Details - CAMPAGNOLA LN44.1000 Manual De Uso

3.4

Tool description

The tying tool is featured by compact structure, light weight and great speed. It can be easily operated by just one
hand. The product combines safety, high efficiency and simple operation. To use it, position the tying front opening
on the branch and pull the trigger. The operation will be carried out within 0.3 seconds. At the end of the operation,
hold and lift up the tool, then carry out the next tying task. The tool is fitted with a tiying adjustment selector with 4
modes. Mode 1: 3 twist tie turns, Mode 2: 4 twist tie turns, Mode 3: 5 twist tie turns, Mode 4: 6 twist tie turns. The
operator can adjust the selector according to the thickness of the branches to be tied, so as to achieve the best
performance.
Before using the tool, please check that the twist tie has the right direction inside the supplying track. It shall not be
rolled up, knotted or locked. If its direction is reverse or if the tie is rolled up, knotted or locked, the tie supplying
system could not work properly and this would lead to unsuccessful tying or to a tool damage. Tool damages
caused by a wrong tie installation are not covered by warranty.
3.5

Tool composition

1. Tie container
2. Twist tie
3. Front cover retainer hook
4. Tie pressing lever
5. Tying mode selector
6. Front cover
7. Feeding hook
8. Tying opening
9. Tying wheel
10. Trigger
11. Handgrip
12. Power cable
13. Battery charger
14. Battery
15. Battery charge level indicator
16. ON7OFF switch
17. Tool / charger connector
3.6

Technical details

Electric tying tool
1 Max tying diameter
2 Rated voltage
3 Rated power
4 Rated current
5 Current protection
6 Protection class
7 Weight
Lithium ions battery
1 Capacity
2 Voltage
3 Autonomy
4 Weight
Battery charger
1 Input voltage
2 Output voltage
3 Charging current
4 Protection class
5 Charging time
Page 28
25 mm
DC 44 V
40 W
1 A
≥5 A
III
0.94 kg
4.4 Ah
43.2 V
20 h
1.5 kg
100-240V AC ,50-60 Hz
DC50.4V
1.0A
II
4-5 h
Use and Maintenance Manual – Original
Instructions Rev.: 00, Date 29/08/2018