Network Connection - Zodiac Security 559590435 Manual De Usuario

[Normal] For ordinary video selection is valid.
[Dynamic test] Valid selection for dynamic detection of video.
[Alarm] After selecting the alarm linkage recording effective.
5 WEB and client
5.1 WEB operation

5.1.1 Network connection

Confirm that your hard disk video recorder correctly plugged into the network, 7,000
series can via the front panel LCD to check network connection status, if the network status
icons are displayed as "XX", means that the network connection error, And 8,000 series via
the front panel b light enables you to view the network connection status, if b is lit, it means
that the network connection, contrary, network is not connected.
To the mainframe computer and DVR set IP address, subnet mask, and gateway. If no
routing device on your network, please allocate the same IP address of a network segment, if
the routing device on your network, you need to set up the gateway and subnet mask. DVR's
network setting, see [configuration management]-> [network configuration].
Make sure to set the correct IP address. IP address after Setup is complete you can use
the Ping tool to check for system comes with DVR is properly connected to the network.
5.1.2 Control installation and user login logout
When properly connected to the network DVR, DVR can be accessed through IE browser
login. Enter the DVR IP address in the IE browser, connection successfully ejected the
following interface: