Zodiac Security 559590435 Manual De Usuario página 65

：The channel is monitoring the locked state, this flag is displayed on the channel screen.
: Allows the screen to switch polling.
3.8.2 Operator Logos
：Enable box unchecked.
：Enabled box is checked state.
：Transferred out of the drop-down menu
：Determined to modify the settings / menu to enter
：Set / cancel to cancel the change to enter the menu.
: To set the parameters.
：Save the current set of parameters.
：Default factory settings, modify parameters, click on the button to return to the
：The current set of parameters is applied to the system.
：The current set of parameters are copied to the other channel.
：Enter the parameter configuration menu.
：Selection and configuration of the alarm, the processing operation of the video
3.9 Real-time browser
Devices start correctly after entering the monitor screen in real time, each screen
superimposed on the date, time, channel name, the bottom of the screen there is a line for
each channel of video and alarm status icon. Also accessible through the front panel, the
remote control or the right and left mouse button double-click the screen switch operation.
If you set the external alarm system, video loss, occlusion detection, dynamic, IP conflict
detection, network cable connection screen, when the alarm occurs, under real-time
monitoring screen will pop up prompting interface, as shown in figure:
last set of parameters.
detection trigger.