Zodiac Security 559590435 Manual De Usuario página 63

English input interface:
Chinese input interface:
Digital input interface:
Special symbols Interface:
3.7 Boot/Shutdown
3.7.1 Boot
DVR is correctly installed and plugged in, the power led is lit, video recorder will automatically
turn on. Show slightly different under different types of device power state , please refer to the
front panel section of this article.
DVR boot process will automatically detect the device hardware state, boot process takes
about 20 seconds. Power-on complete devices after the buzzer was given a "beep" tone, and
enter the screen real-time video surveillance state, equipment operation or configuration can
be at this time. Please refer to 4.2 main menu introduction and subsequent introduction.
If the start-up time within the video to set the time, the system will automatically start a
scheduled recording function.
Note: Please use the DVR power supplied, you may not use other types of branded power
supply instead of the original power supply.