Zodiac Security 559590435 Manual De Usuario página 114

Note: different manufacturers, different types of product attributes is not the same. To the user,
without an in-depth understanding of their specific meaning, just understand the meaning of
monitoring value of the property.
3、Threshold
It is also known as the threshold value. Reliable property value is specified by the hard drive
manufacturer, by a specific formula. If you have a property corresponding to the value of
public expenditure threshold, it means that the hard drive will become less reliable, saved in
the hard disk of the database can be easily lost. Reliable property values differ from the
composition and size of the hard drive, there is a difference. Here it is important to note, some
S.M.A.R.T ATA standards only in parameters, it does not provide for specific values,
"Threshold" value is set by the manufacturer according to the product characteristics and,
therefore, by manufacturers themselves provide detection under Windows with software
testing software (such as AIDA32) test results have greater access.
4、value
Property value refers to the maximum normal hard drive is factory preset, general scope of
1-253. Typically, the biggest property value is equal to 100 (applies to IBM, quantum, Fujitsu)
or 253 (applies to Samsung). Of course, there are exceptions, such as some models of hard
disk from Western Digital company production, using two different property values, when
production property value is set to 200, but later manufacturing hard property value to 100.
5、Worst
Worst is the largest non-hard drive running in the new year there have been normal. It is a
calculated value of the Trojan runs on the hard drive, the operating cycle, a number that is
constantly refreshed. And very close to the threshold value. S.M.A.R.T analysis and
determine whether the status of the hard disk correctly, are the results based on the
comparison of this value and the threshold value may be. New maximum property value at the
beginning of the hard disk, but with daily use or if an error occurs, the value will decrease and,
therefore, larger property values means that hard drives better quality and high reliability, and
lower property values the mean likelihood of failure.
6、Raw Value
It is the actual value, a lot of projects in the various test items to run in hard cumulative value.
7、Status
This is the S.M.A.R.T property value analysis for front, hard disk provided by the current state
of the property, our intuitive judgments hard drive "health" status of important information.
Under the terms of S.M.A.R.T, such status is generally OK, warning, and reporting failures or
errors, 3 States, S.M.A.R.T found out that 3 status and S.M.A.R.T Pre-failure/advisort BIT
parameter assignments are closely related.