Zodiac Security 559590435 Manual De Usuario página 108

General operation: (same step, but the distance is not equal)
Step: mainly used to control the direction of operations, such as step 8 of the rotation speed of
the rotation speed is much larger than the step size to 1. (Their values can click Digital soft
Panel or directly press the 1-8 front panel step, 8 is the maximum step size).
Click directly on the camera, zoom, gathering minus, plus key, to adjust the zoom, sharpness,
brightness.
PTZ support 8 direction of rotation (The front panel can only be used up, down, left and right 4
directions).
Fast orientation: in the middle of the direction <SIT>is a quick navigation keys, only supports
the Protocol can only be used for the feature, and can only be controlled with the mouse.
Click after to locate pages quickly.
On the page, click "-" ,PTZ will go to the point and the point to the middle of the screen.
Locate pages quickly using the mouse drag. Drag the Zoom box support 4-16 times a
function key, if you want to big screen, press and hold the mouse to drag the upper left corner,
if you want smaller screen, press and hold the mouse dragging from right corner to the
upper-left corner. Drag boxes small multiples of bigger and bigger, on the contrary, smaller.
Advanced Features
Click on switch into the advanced features menu, as shown in the figure.
[Preset] called: preset value in the input box enter the desired preset point of call (previously
set preset point) and click on the [preset] button calls.
[Cruising] called: cruising between the point value of cruise line value entered in the input box
and click the [cruise] button, you can call, click on the [stop] button to stop.
[The patrol track] called: patrol tracks cruise line value entered in the input box and click the
[cruise] button to make the call. Camera automatically set reciprocating keeps track of
movement, you can right-click the menu hidden. To enter the menu press any key to stop the
patrol track runs manually.
[Linear sweep] called: to enter the menu, click the line scan button, start the line according to
the previous set line-scan-scan operation, while [line scan] button changes to [stop] button,
you can right-click the menu hidden, to stop the line scan, click the [stop] button.