Network Configuration - Zodiac Security 559590435 Manual De Usuario

[Channel] select the channel with PTZ camera access.
[Protocol] select brand type of PTZ Protocol (such as PELCOD)
[Address] set the appropriate address, default is 1 (Note: here the address be sure to line and
dome address, you cannot control the pan/tilt).
[Baud rate] select the baud rate used for PTZ, PTZ and camera to the respective channel
controls default is 2,400.
[Data bits] the default is 8.
[Stop bit] the default is 1.
[Verify] the default is no.

4.8 Network Configuration

Enter the network configuration interface, DVR network parameters can be set. DVR factory
default IP address is 192.168.1.88.
Basic Configuration
The basic configuration interface as shown below：