Precautions
On safety
• Operate the HSR-X200 on 120 V AC, 60 Hz or the
HSR-X200P on 220-240V AC, 50/60 Hz.
• The nameplate indicating operating voltage, current
consumption, etc., is located on the rear of the unit.
• Should any solid object or liquid fall into the cabinet,
unplug the unit and have it checked by qualified
personnel before operating it any further.
• Do not drop or place heavy objects on the power
cord. If the power cord is damaged, unplug the unit
immediately. It is dangerous to use the unit with a
damaged power cord.
• Connect the power cord to the wall AC outlet.
For connecting the power source, see "Basic Connection
Example" on page 40(GB).
• Unplug the unit from the wall outlet if it is not to be
used for several days or more.
• Disconnect the power cord from the wall AC outlet
by grasping the plug, not by pulling the cord.
On installation
• Do not place a heavy object on the unit.
• Allow adequate air circulation to prevent internal heat
build-up. Keep the top, sides, and rear of the unit
5 cm (2 inches) or more away from the walls or
ceiling. Do not detach the feet of the unit. The space
under the unit is necessary.
Do not place the unit on surfaces (rugs, blankets, etc.)
or near materials (curtains, draperies) that may block
the ventilation slots.
• Do not use the unit in a closed box.
• Do not install the unit in a location near heat sources
such as radiators or air ducts.
• Place the unit to avoid direct sunlight.
• Do not install the unit in a place subject to
mechanical vibration or shock.
• Do not put magnetic objects close to the unit and
cassette tape. Magnetic fields may affect the color
reproduction of the unit and cause distortion.
• The unit is designed for operation in a horizontal
position.
Do not install it in an inclined position.
On operation
When the unit is not in use, unplug the unit to conserve
energy and to extend its life.
On cleaning
As a safety precaution, unplug the unit before cleaning
it.
• To keep the unit looking brand-new, periodically
clean it with a mild detergent solution. Never use
strong solvents such as thinner or benzine, or abrasive
cleaners since they will damage the cabinet.
When cleaning, keep liquid away from electrical
contacts and connectors.
• When there is a buildup of dust on air vents, use a
vacuum cleaner to remove it.
On repacking
• Before repacking, disconnect all cables and
connecting cords.
• Do not throw away the carton and packing materials.
They make an ideal container with which to transport
the unit. When shipping the unit to another location,
repack it.
On transportation
When transporting the unit, protect it from vibration
and impact.
If you have any questions about this unit, contact your
authorized Sony dealer.
Backup function
• This unit is equipped with a backup battery (lithium
battery) on the bottom to maintain the clock
settings. When the unit is used under normal
conditions, the backup battery is recharged. The
battery is fully recharged after a minimum of
about 30 hours, and will maintain the clock
settings for up to about 30 days.
Note
The settings may not be maintained properly if the
backup battery has been recharged for less than 30 hours
when the power goes off.
• To replace the backup battery (lithium battery),
contact your Sony dealer.
5
(GB)