Daewoo DTD 5500 Manual De Instrucciones página 42

Press key to enter missed call lists, received call lists or dialed call lists respectively.
1) The LCD will show the last record. (If no entries are available in the list, LCD will show EMPTY ).
Press ∧ or ∨ key to view other record.
2)
When the record is show, press
DELETE ALL? Then press
1) ADD TO PB (this function allows the user to add an entry from the caller list to the phone book, the
method please refer to " To store an incoming or outgoing number in your phonebook ")
2) DELETE (the function allows the user to delete the currently selected entry from caller list by pressing
R/C key.)
3) DELETE ALL ( this function allows the user to delete all numbers)
Note: In idle state, press ∧ key once to incoming records or press ∨ key to review outgoing records.
Handset Menu Function 3: Base settings
The user is able to change the base setting in base settings item, press
select this item. Then you can do below:
 To delete handset:
This function allows the user to delete a handset registration from the base.
1) Press
2) Press
3) Input the correct 4-digit pin code and press
4) Press ∧ or ∨ key will scroll the handset names. Press
The delete handset will be deleted from the list on registered handset on the base.
﹡ After you delete the handset, you will not be able to enter base settings menu in idle mode.
 To set dial mode (Tone/Pulse)
The user can select to change the mode in which the base will dial.
1) Press
2) Press
3) Press
Note: According to your telephone lines or PABX systems you may need to change the dialing mode
between Tone and Pulse.
 To set flash time
The user can select the flash time (100ms, 300ms, 600ms and 1000ms) to meet your telephone line or
PABX requirement.
1) Press
2) Press
3) Press
 To change the PIN code
Some functions (including handset delete and base default) require a PIN code. The default PIN is 0000,
but you are able to change to your personal 4-digit PIN.
1) Press
key, use ∧ or ∨ key to choose among ADD TO PB? DELETE?
key to confirm :
key the first show is DELETE HS .
key to enter; the user will be prompted to enter the PIN code (default as 0000).
key, then use ∧ or ∨ key to select DIAL MODE item.
key to enter. Press ∧ or ∨ key to select the TONE or PULSE dialing mode.
key to confirm your selection.
key, then use ∧ or ∨ key to select FLASH TIME
key to enter. Press ∧ or ∨ key to select the 100ms, 300ms, 600ms and 1000ms.
key to confirm your selection.
key, then use ∧ or ∨ key to select MODIFY PIN item.
key to confirm
key to confirm.
42
key and use ∧ or ∨ key to