Daewoo DTD 5500 Manual De Instrucciones página 43

2) Press
3) Press
4) Press
confirm. If you've entered wrong PIN, you will hear an error tone and the display will return to the
previous menu.
 To set base to default settings
This function allows the user to restore the base settings to the factory default:
The Caller Display (CID) and Outgoing Calls list will be erased, but the phonebook memories and TAM
settings will remain unchanged.
1) Press
2) The user will be promoted to enter PIN code. Use keypad to enter PIN code. (Default PIN is 0000)
3) Press
factory default.
Handset Menu Function 4: HS settings
The user is able to change a number of the settings for the handset to their own individual preferences. Press
key and use ∧ or ∨ key to select HS SETTINGS. Then you can do below:
 ALARM
You can set an alarm function on the handset, to give an alert at a programmed time of every day.
1) Press
2) Press
the alarm off, and the user is dropped back to the ALARM menu, select of ALARM ON option will
turn the alarm on, and the user will be requested to set the alarm time.
3) After select ON, press
4) Press ∧ or ∨ key to change the hours, press
AM/PM by the same way.
5) After you set the alarm time, the user will be presented with a further option to select to SNOOZE
ON or SNOOZE OFF to enable or disable the snooze function on the alarm.
6) Press
of the display.
Startup alarm: In idle state, the alarm will ring on the time you have set.
Intermit alarm: During the alarming, you can switch it off by pressing any key of the handset, or
when a call comes, the alarm will be intermitted too.
Close alarm: Re-enter the alarm setting menu option and select OFF.
Notes:
1) If the SNOOZE is set ON, the alarm will be repeated about every 5 minutes for about nine times, with
the alarm icon continuing to flash. During the alarming, press any key except
alarming, and will begin to ring after 5 minutes.
2) If the SNOOZE is set OFF, the alarm will sound for 45 seconds once.
key to confirm. Use keypad to enter the PIN code ( the default PIN is 0000).
key to confirm. Use the keypad to enter the new PIN (4 digits from 0-9).
to confirm. Use the keypad to enter the new PIN again and press
key, then use ∧ or ∨ key to select BS DEFAULT item. Press
key to confirm. If the PIN code is validated all base settings will be returned to the
key, the first sub-menu is ALARM item.
key to enter. Press ∧ or ∨ key to select ON or OFF, select of ALARM OFF will turn
key to start the settings of alarm, 12-00 displayed with "12" flashing,
key to confirm your selection. When the alarm is set, the
key to confirm, and setup the minutes and
43
key to
key to confirm.
will appear on the top
key to intermit