Daewoo DTD 5500 Manual De Instrucciones página 34

Use ▲/CID or ▼/OUT key to select DATE&TIME item, press MENU key to enter date and time
1)
setting. The last two digits of the year flashes.
Press ▲/CID or ▼/OUT key to edit the flashing value, then use MENU key to confirm and enter
2)
the month value setting.
3) Use the same method for month, date and time setting. Press MENU key to confirm and return to
the DATE & TIME menu.
 To change the PIN code
Some functions (including handset delete and base default) require a PIN code. The default PIN is 0000,
but you are able to change to your personal 4-digit PIN.
Use ▲/CID or ▼/OUT key to select MODIFY PIN item.
1)
Press MENU key to confirm. Use keypad to enter the PIN code (if you haven't changed it, the
2)
default PIN is 0000).
3) Press MENU key to confirm. Use the keypad to enter the new PIN (4 digits from 0-9).
4) Press MENU to confirm. Use the keypad to enter the new PIN again and press MENU to confirm.
If you enter the wrong PIN you will hear an error tone and the display will return to the previous menu.
 To set base to default settings
This function allows the user to restore the base settings to the factory default:
The Incoming Calls list and Outgoing Calls list will be erased, but the phonebook memories and TAM
settings will remain unchanged.
Press MENU key, then use ▲/CID or ▼/OUT key to select BS DEFAULT item.
1)
2) Press MENU key to confirm. The user will be promoted to enter the PIN code. Use keypad to
enter the PIN code. (Default PIN is 0000)
3) Press MENU key to confirm, if the PIN code is validated all base settings will be returned to the
factory default.
Base Menu Function 4: Handset registration
！ The handset supplied with the base unit is already registered. You don't need to re-register them,
unless you have a problem.
To check whether a handset is registered, make sure the unit is powered on and the handset is within range.
The handset's display should show its number, and the "signal strength" symbol on the screen should show
three bars. If the handset unregistered, you need to re-register the handset again use the following process:
Note: You need to operate the base and handset together
1) On the base, press MENU key. Press ▲/CID or ▼/OUT key to select REGISTRATION item.
2) Press MENU key to enter. LCD shows SEARCHING and it flashes. If registration is successfully,
the base will return to standby mode.
3) On the handset, press
REGISTRATION
4) Press
5) If the handset already has a registration to a base, there is a "+" on the right side of the display,
and you should choose another base number if you don't want to loose that one.
6) Press
key to see PHONEBOOK Press ∧ or ∨ key to choose
key to see BASE 1
key, the display shows PIN? , key in the 4 digit PIN code for the base (the default PIN
34