Safety instructions
NOTICE!
A
Check that the voltage specification on the type plate is the
same as that of the power supply.
Never pull the plug out of the socket by the connection cable.
The cooling device is not suitable for transporting substances
which are caustic or contain solvents.
2.2
Operating the device safely
WARNING! Fire hazard!
!
Never operate the device with gas
– at petrol stations
– on ferries
– when transporting the caravan or motorhome with a
transport or towing vehicle
NOTICE!
A
Do not use electrical devices inside the cooling device unless
they are recommended by the manufacturer for that purpose.
Danger of overheating!
Always ensure sufficient ventilation so that the heat generated
during operation can dissipate. Provide an air inlet with a cross-
section of at least 250 cm
of at least 250 cm
Ensure that the ventilation openings are not covered.
Protect the device and the cable against heat and moisture.
The device may not be subjected to rain.
2.3
Operating the device safely at 12 Vg
NOTICE!
A
Only select 12 Vg mode (battery mode) if you are using a
battery monitor or if the vehicle generator provides sufficient
voltage.
Only use cables with the appropriate cable cross section:
88
RM5310, RM5330, RM5380
2
and an air outlet with a cross-section
2
.
EN