Makita BTD130F Manual De Instrucciones página 8

Noise
The typical A-weighted noise level determined according
to EN60745:
Model BTD130F, BTD140, BTD141
Sound pressure level (
Sound power level (
Uncertainty (K): 3 dB (A)
Model BTD142
Sound pressure level (
Sound power level (
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BTD130F
Work mode: impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model BTD140, BTD141
Work mode: impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model BTD142
Work mode: impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a Uncertainty (K): 1.5 m/s
8
ENG905-1
): 90 dB (A)
L
pA
L ): 101 dB (A)
WA
): 89 dB (A)
L
pA
L ): 100 dB (A)
WA
ENG900-1
2
): 14.0 m/s
h
2
2
): 17.0 m/s
h
2
2
): 15.5 m/s
h
2
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the oper-
ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine: Cordless Impact Driver
Model No./ Type: BTD130F, BTD140, BTD141, BTD142
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorized
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, MK15 8JD, England
30. 1. 2009
Tomoyasu Kato
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
as the responsible
Director
ENG901-1
ENH101-14