Before Using Your Appliance - Oster CKSTGR4768 Manual De Instrucciones

BEFORE USING YOUR APPLIANCE

Before using your Oster
1. Remove any stickers from the product.
2. DO NOT IMMERSE TEMPERATURE CONTROL PROBE IN WATER.
3. Clean and condition the ceramic non-stick surface:
• Wash grill surface and base in hot, soapy water. Rinse and dry thoroughly.
• Attach grill plate to base. Make sure that the clip on the bottom of the grill plate clicks
into place (see figure 1).
• To condition the cooking surface, plug the appliance into the appropriate electrical
outlet. Turn the temperature control knob clockwise choosing one of the low
temperature settings. The orange indicator light will illuminate. Allow the unit to
pre-heat until the orange ready light goes off, indicating that the selected cooking
temperature has been reached.
• Wipe a small amount of butter or margarine onto the cooking surface, spread slightly
and wipe away any excess.
NOTE: When using the unit for the first time, you may notice a fine smoke haze
coming out from the unit. This is normal. It is due to the initial heating of internal
components.
Your Oster Grill is now ready to use and it will not be necessary to condition it again.
®
Grill for the first time, please follow the instructions below:
®
Eng lish-4
Figure 1