Contents-Unpacking - 3M 07 Manual Del Usuario

Contents
Unpacking
Remove the components from the box. Inspect for concealed damage and/or missing
items. If you discover any damage and/or missing pieces, contact your distributor
immediately.
Your 3M™ Series 07, 07HS, 10G and 10GP Spray Gun Kit includes:
• Spray Gun
• Care Kit
• Cup (Optional)
* Maximum inlet pressure will yield approximately 10 psi at the air cap.
3M™ Series 07 Spray Gun
The 3M™ Series 07 Gravity Spray Gun features an aluminum
body with a non-stick, solvent resistant finish, 10 cfm air
consumption, 4.3:1 reduction ratio, 1/4" air inlet and 43 psi
maximum inlet pressure*. This gun is for use with compressed
air systems.
3M™ Series 07HS Spray Gun
The 3M™ Series 07HS Gravity Spray Gun features an aluminum
body with a non-stick, solvent resistant finish, 10 cfm air
consumption, 4.3:1 reduction ratio, 1/4" air inlet and 43 psi
maximum inlet pressure*. This gun is for use with compressed
air systems.
3M™ Series 10G Spray Gun
The 3M™ Series 10G Spray Gun is a non-bleed, gravity fed spray
gun with a composite body construction, 10 cfm air consumption,
1:1 reduction ratio, 3/4" Quick Disconnect air inlet and a 10 psi
maximum inlet pressure*. It can be used with a turbine unit or
converted to use with a compressed air source by adding a low
pressure regulator.
3M™ Series 10GP Spray Gun
The 3M™ Series 10GP Spray Gun is a non-bleed gravity fed spray
gun with a composite body construction; 10 cfm air consumption,
1:1 reduction ratio, 3/4" quick disconnect air inlet, and a 10 psi
maximum air inlet pressure*. It also features a pressurized cup. It can
be used with a turbine unit or converted to use with a compressed air
source by adding a low pressure regulator.
7