Switch The Phone On And Off - Nokia 6086 Manual Del Usuario

Insert a microSD card
To insert a memory card, use a fingernail as a
lever, place it in the recessed area of the memory
card holder, and swing the holder open (1).
Place the memory card in the card holder (2).
Make sure that the memory card is properly
inserted and that the gold-colored contacts on
the card are facing upwards. Close the memory
card holder (3).
You can use the memory card to save your
multimedia files, such as video clips, sound
files, and images, in the Gallery.
Remove the microSD card
Important: Do not remove the memory card in the middle of an operation
when the card is being accessed. Removing the card in the middle of an
operation may damage the memory card as well as the device, and data
stored on the card may be corrupted.
To remove the memory card, use a fingernail as a lever, place it in the recessed
area of the memory card holder, and swing the holder open. Push gently with a
fingernail against the card to loosen it from the holder. Pull the card out. Close
the memory card holder.
Format the memory card
To format the memory card, see "Format memory card," p. 46.

■ Switch the phone on and off

Press and hold the end key until the
phone switches on or off. If the
phone asks for a PIN, enter the code,
and select OK.
Plug and play service
When you turn on your phone for the
first time, and the phone is in the standby mode, you are prompted to get the
configuration settings from your service provider (network service). Confirm or
decline the query. See
p. 72 and "Configuration settings service," p. 10.
Connect to service provider support
G e t s t a r t e d
in "Configuration,"
13