Intended Use - Miele professional A 313 Instrucciones De Manejo

en - Intended use
This module can be used to reprocess machine-reprocessable labor-
atory glassware and utensils in a Miele washer-disinfector for laborat-
ory glassware and utensils. Follow the operating instructions for your
washer-disinfector as well as the instructions of the glassware and
utensil manufacturer on how to reprocess their items by machine.
The A 313 module is designed for reprocessing large-volume laborat-
ory glassware with a maximum diameter of 232 mm. The maximum
vertical clearance is determined by the type of components used.
The module is supplied without injector nozzles. Miele offers various
component sets which can be fitted based on the relevant require-
ments. The sets consist of injector nozzles and holders which are de-
signed for reprocessing different types of large-volume laboratory
glassware.
Depending on the height and diameter of the load items, the module
is suitable for laboratory glassware with the following volumes:
– Laboratory flasks from 2 l to 10 l (max. height 410 mm)
– Round flasks from 2 l to 6 l
– Erlenmeyer flasks from 2 l to 5 l
– Measuring flasks from 2 l to 5 l (max. height 470 mm)
Because of its height, this module can only be used in a lower bas-
ket. It is not possible to use an upper basket at the same time.
The module can only be used in the following basket:
– Lower basket A 150
Up to 2 injector modules can be placed in one lower basket.
The washer-disinfector is generally referred to as "the machine" in
these operating instructions. Reprocessable laboratory glassware and
utensils are referred to as "items" if they are not more closely defined.
33