ForaCare GD40 Manual Del Usuario página 31

► Data transmission via Bluetooth
(For ForaCare GD40b)
You can use your monitor and Health Care Software System to view
your test results on your personal computer. To learn more about
the Health Care Software System, please contact local customer
services or the place of purchase for assistance.
Step 1
Installing the software
To download the Health Care Software System, please visit the
ForaCare Inc. website: http://www.foracare.com.
Step 2
Connecting to a personal computer
The meter will automatically initiate searching
for the compatible Bluetooth receiver and start
the data transmission after the measurement,
the calibration, exit the meter memory or finish-
ing the setting. The BT indicator will light up in
blue and start blinking.
Step 3
Data transmission
When the BT indicator is blinking, this indicates that the meter is
searching for pairing. When the BT indicator shows a steady blue
light, the meter has connected to the Bluetooth receiver and the
transmission is going to begin.
The BT indicator will blink for 3 minutes. If the compatible Bluetooth
receiver was not found, then the indicator would be off automatically
afterwards.
NOTE
• Make sure your PC has Bluetooth before transmitting the data and the meter
is within the receiving range.
• While the meter is connected to the PC, it is unable to test for blood glucose.
31