ForaCare GD40 Manual Del Usuario página 16

If you do not want to set an alarm, press SET to skip this step.
If you want to turn off an alarm, find the alarm number by pressing
SET in the setting mode, press to change from ON to OFF .
At the time of your alarm, the
meter will beep and automati-
cally turn on. You can press to
silence the alarm and insert a test
strip to begin testing.
If you do not press , the meter will beep for 2 minutes then
switch off.
If you do not want to test at this time, press to switch off the
meter.
Congratulations! You have completed all settings!
NOTE
• These parameters can ONLY be changed in the setting mode.
• If the meter is idle for 3 minutes during the setting mode, it will switch off
automatically.
16