Before You Begin - GE ZET1P Manual Del Propietário

Full To avoid possible burns, place the racks in the
correct position before turning on the oven.
extension
The correct rack position depends on the
oven racks
kind of food and the browning desired.
Upper
front rail
The racks have a frame that locks into the
rack supports on both sides. Once the frame is
locked into place, always pull the rack out, by
its upper front rail, to its full extension stop
position, when placing or removing cookware.
Lower
front rail
To remove a rack:
1. Make sure the rack is pushed all the way into
2. Grasp the rack by both its upper front rail
Front rack lock
the oven.
and its lower front rail and lift straight up
to unlock the front rack locks from the
rack supports.
Lift to unlock
front rack
locks from
the rack
support

Before You Begin

3. Firmly holding onto both the upper and
The oven
has 5 rack
positions
Rack frame
To replace a rack:
Rack extended
to its full stop
position
1. Place the rear rack locks over and onto
Upper front
rack rail
2. Slide the rack all the way in until the
Lower
front rail
Upper
front rail
Wall Oven
lower front rack rails, pull the rack forward
and remove it from the oven.
Upper
front rail
the rack supports (five rack positions are
available including the top position).
rear rack locks are secure on the rear rack
supports and press the front rack locks onto
the front rack supports.
Lower
front rail
Front rack lock
Slide the rack all the way in
and push down to lock the
front rack locks onto the
front rack supports
11