Connect Wiring - Best CC6 Serie Instrucciones De Instalación

17. CONNECT WIRING

Risk of electric shock. Electrical wiring must be done by qualified personnel in accordance with all applicable
codes and standards. Before connecting wires, switch power off at service panel and lock service disconnecting
means to prevent power from being switched on accidentally.
Insert the house wiring cable through the wire clamp previously installed in step 9. Tighten the wire clamp to secure the cable.
Connect cable using provided wire connectors.
Connect wires as follows: BLACK to BLACK, WHITE to WHITE and GREEN or BARE
wire under ground screw. DO NOT FORGET TO CONNECT THE GROUND.
18. REINSTALL FRONT PANEL AND WIRING COVER
Take care not to pinch wiring when reinstalling the front panel and the wiring cover.
Carefully reassemble the front panel to the power pack by aligning the tabs with their corresponding slot. Using a Robertson or a Phillips
no. 2 screwdriver, secure the front panel to the power pack using its both retaining screws (A) previously removed in step 8. Reassemble
the wiring cover using its both retaining screws (B) previously removed in step 8. Plug the motor(s) (one or two, depending on model) to
the front panel.
HO0260
(ALL MODELS)
!
CAUTION
B
HD1098
WARNING
HE0059
A
11
HE0105
A