Olympus PER-E01 Manual De Instrucciones página 15

4 Loading the Camera and Lens
After installing the EC-14 ZUIKO DIGITAL 1.4X TELECONVERTER rear converter between the camera
and lens, insert the camera and lens into the PT-E series case on which the PER-E01 and the PPO-E
series lens port are mounted.
Screw the camera table provided with the PT-E
series case firmly into the bottom of the cam-
era.
Install the separately available EC-14 ZUIKO
DIGITAL 1.4X TELECONVERTER rear converter
between the camera and lens as instructed in the
rear converter's manual.
Remove the eyecup from the camera's viewfind-
er. If a lens cap or filter is attached to the lens or
the strap is attached to the camera, remove them
as well.
Mode dial knob
Zoom dial
Camera table lock lever
Lift the PT- E series case's power switch dial,
mode dial knob and zoom dial, and turn the
case's camera table lock lever counterclock-
wise to release the lock. Refer to the PT-E
series case's instruction manual for instructions
of how to attach the hot shoe cable for the
flash.
E-5
Power switch dial