Control Panel - Hamilton Beach Revolution Serie Manual De Instrucciones

Operation

Control Panel

Familiarize yourself with the control panel and the display messages before using the unit.
PULSE button
Blender jar must
be in place. Allows
manual blender
operation.
Press and hold to
run the blender on
high speed.
Release to stop
blender.
SHAVE button
Allows manual ice
shaver operation.
Press and hold to
shave ice, release
to stop ice shaver.
Display messages
The screen can be used to display important diagnostic and troubleshooting information, as well as
operating information. Press the L or M button to scroll through status and diagnostic messages.
For Example:
TOTAL SHAVE/BLEND
CYCLES - 999999
DRAIN SENSOR
ENABLED
JAR PAD SENSOR
ENSABLED
6
Serving Size Buttons A–D
Press A–D to select the
desired serving size.
Number of Servings Buttons 1–4
Press 1–4 to select the desired number of
servings (1 to 4).
To Display Cycle Count:
While the unit is not in operation, press the L or M
button to display the cycle counts.
To Enable or Disable the Drain Sensor:
With this message displayed, press the pulse to
select between enabled and disabled.
To Enable or Disable the Jar Pad Sensor:
With this message displayed, press the pulse to
select between enabled and disabled.
Scroll up/down buttons
Press the L or M button to
scroll through status and
diagnostic messages.
START button
Starts operation
of the selected
cycle.
Display
displays status
messages
STOP button
Stops operation
of the selected
function.
Does not shut
off power to
the unit.