Installaton - CORBERO CCV V3 Instrucciones De Funcionamiento

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

INSTALLATION
The electrical connection of this hob should be carried out by an
authorised service personal or a qualified electrician, according to the
instructions in this guide and in compliance with the current regulations.
· Before connecting your appliance to the mains at home, make sure to
check the conformity of voltage settings, which are specified on the information
sticker attached to the appliance and/or packaking, with the usage conditions
available.
· The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accordance
with the regulations, etc.)
Locating your built-in hob
After removing the packaging material from the appliance and its accessories,
ensure that the hob is not damaged. If you suspect any damage, do not use
the appliance and contact an authorised service personal or a qualified
electrician immediately.
· This built-in hob is to be inserted into a cut out of a worktop.
· Create an opening with the dimensions shown in next picture. The distance
between the rear edge of the hob and any adjacent wall is depend on wall
surface. Please don't use easily combustible material like curtain, paper at
nearby hob.
7
Tabla de contenido
loading

Tabla de contenido