Accessories; In Case Of Damage; Connecting The Unit; Ventilation Slots - Dentsply Sirona inLab MC X5 Instrucciones De Uso

Dentsply Sirona
Operating Instructions Suction devices for inLab MC X5 and
64 98 609 D3608
D3608.201.02.04.02 09.2017
2.1.5

Accessories

In order to ensure product safety, this device may be operated only with
original Dentsply Sirona accessories or third-party accessories expressly
approved by Dentsply Sirona. In particular, only the power cable also
supplied or the corresponding original spare part may be used with the
unit. The user is responsible for any damage resulting from the use of
non-approved accessories.
2.1.6

In case of damage

In case of noticeable malfunctions or damage, stop using the instrument
immediately and notify your authorized dealer or the manufacturer.
2.2

Connecting the unit

The connection must be established in accordance with the directions
provided in these operating instructions. Also observe the information in
the Operating Instructions for inLab MC X5, CEREC MC / MC X or
CEREC MC XL Premium Package units.
If any devices not approved by Dentsply Sirona are connected, they must
comply with the applicable standards:
● EN 60 950 for information technology equipment, and
● EN 61 010-1 for laboratory equipment.
2.3

Ventilation slots

Under no circumstances may the ventilation slots on the unit be covered,
since otherwise the air circulation will be obstructed. This can cause the
unit to overheat.
2 Safety information
9