Grounding Instructions - DeWalt DWV012 Manual De Instrucciones

To reduce your exposure to these chemicals, wear approved safety
equipment such as dust masks that are specially designed to filter
out microscopic particles.
For your convenience and safety, the following warning labels are
on your vacuum.
ON MOTOR HOUSING (on back of vacuum head):
WARNING:
• THIS VACUUM MEETS THE EPA LEAD RELATED
RENOVATIONS, REPAIR AND PAINTING (RRP) RULE FOR
HEPA VACUUM ONLY IF DWV9320 HEPA FILTER IS USED.
• TO REDUCE THE RISK OF INJURY, USER MUST READ
INSTRUCTION MANUAL. DO NOT RUN UNATTENDED.
DO NOT PICK UP FLAMMABLE, COMBUSTIBLE OR
HOT MATERIALS. DO NOT USE AROUND EXPLOSIVE
DUST, LIQUIDS OR VAPORS. ELECTRICAL DEVICES
PRODUCE ARCS OR SPARKS WHICH CAN CAUSE FIRE
OR EXPLOSION. DO NOT USE AT FILLING STATIONS OR
ANYWHERE GASOLINE IS STORED OR DISPENSED. DO
NOT VACUUM TOXIC OR CARCINOGENIC MATERIALS
OR OTHER HEALTH ENDANGERING MATERIAL SUCH
AS ASBESTOS OR PESTICIDES. ALWAYS USE PROPER
EYE AND RESPIRATORY PROTECTION. TO REDUCE THE
RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE TO
RAIN. STORE INDOORS. WHEN SERVICING, USE ONLY
IDENTICAL REPLACEMENT PARTS. NOT TO BE USED
AS A STEP STOOL. (THE USE OF THIS MACHINE IN
CONJUNCTION WITH THE PICK UP OF LEAD HAS NOT
BEEN INVESTIGATED BY UL)
CAUTION: RISK OF FIRE AND INJURY. DO NOT EXCEED
15 AMPS. THE RECEPTACLE IS ENERGIZED WHEN THE VACUUM
IS ON OR SET TO AUTO MODE. WHEN SET TO AUTO MODE,
THE VACUUM WILL TURN ON AUTOMATICALLY WHEN THE
APPLIANCE CONNECTED TO THE RECEPTACLE IS TURNED ON.
SAVE THESE
INSTRUCTIONS

Grounding Instructions

This appliance must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This appliance
is equipped with a cord having an equipment-grounding conductor
and grounding plug. The plug must be inserted into an appropriate
outlet that is properly installed and
grounded in accordance with all local
codes and ordinances.
WARNING:
connection of the equipment-grounding
conductor can result in a risk of electric
shock. Check with a qualified electrician
or service person if you are in doubt
as to whether the outlet is properly
grounded. Do not modify the plug
provided with the appliance – if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
This appliance is for use on a nominal 120-volt circuit and has a
grounding attachment plug that looks like the plug illustrated in
Figure A. Make sure that the appliance is connected to an outlet
having the same configuration as the plug. No adaptor should be
used with this appliance.
Motor
Be sure your power supply agrees with the nameplate marking.
Voltage decrease of more than 10% will cause loss of power and
overheating. D WALT tools are factory tested; if this tool does not
E
operate, check power supply.
3
FIG. A
GROUNDED
OUTLET
Improper
GROUNDING
PIN