Connect The Unit; Set The Inlet Regulator - Oase AquaMax Eco Premium 2000 Instrucciones De Uso

- English -
Installation
Important:
● The unit can be placed submerged or inline.
● Always place the unit below water level.
● Place the unit horizontally on the ground ensuring its stable position.

Connect the unit

● Recommendation for the use of the stepped hose
adapter and hose connector:
• Second inlet (A): Stepped hose adapter 1" to 1½"
(25 to 38 mm)
• Pump outlet (B): Hose connector 2" (50 mm)
(alternative: stepped hose adapter 1" to 1½"
(25 to 38 mm)).
1. Push the hose clip (C) and the union nut (D) over
the hose.
2. Fit the hose on the stepped hose adapter (E) or
hose connector (F) and secure with the hose clip.
3. Fit the stepped hose adapter or hose connector on
the second inlet (A) or pump outlet (B) and hand-
tighten the union nut.
Operate the unit with the pond filter
1. Connect the pump outlet to the pond filter.
2. Close the second inlet with the screw cap.
Operate the unit with the satellite filter or with the skimmer, and pond filter
1. Connect the second inlet to the
satellite filter or skimmer.
2. Connect the pump outlet to the
pond filter.

Set the inlet regulator

1. Unlock the locking (B) (pull towards the inlet regulator) while
pushing the inlet regulator (A) to the desired position (0 to 4).
• 0: Second inlet closed. Water is only drawn in via the
housing (strainer casings).
• 1 to 3: Part of the water is drawn in via the housing
(strainer casings), and part via the second inlet.
• 4: The second inlet is fully open. Water is only drawn in via
the second inlet
Recommendation:
• When operating with the second inlet closed, turn the inlet
regulator (A) to 0.
• When operating with the satellite filter or skimmer, turn the
inlet regulator (A) to a position between 1 to 4.
4
A
E
D
C
A
B
F
D
C
B