Display Brightness; Switching Demo Mode On/Off; Bluetooth® Functions (Only Toronto 410 Bt); Traffi C Information - Blaupunkt Madrid 210 Instrucciones De Manejo

Display brightness

You can manually switch the display brightness
between daytime mode and night-time mode or
switch automatically with the driving lights of the
vehicle.
Note:
The manual or automatic switching of the
display brightness is selected in the user
menu (see the chapter "User settings", sec-
tion "Making settings in the "DISPLAY" menu",
menu item "DIMMER").
u
Press the DISP button
onds to manually switch the display bright-
ness.

Switching demo mode on/off

The demo mode shows the functions of the car
sound system as scrolling text on the display. By
pressing any button, the demo mode is interrupt-
ed and you can operate the device.
The demo mode can be switched on and off in the
user menu (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu", menu
item "DEMO MODE").
Bluetooth® functions
(only Toronto 410 BT)
The Toronto 410 BT can be connected with suit-
able cell phones and MP3 players via Bluetooth®.
This enables it to perform hands-free calling with
the connected telephone (via the loudspeakers
and the integrated microphone of the car sound
system) and audio playback of MP3 fi les stored on
the Bluetooth® device.
Note:
You can also connect an external microphone
for hands-free calling (see the chapter "Instal-
lation instructions").
For the Bluetooth® functions of the Toronto 410 BT,
please read the enclosed "Bluetooth® instructions
for Toronto 410 BT".
Placing the device in operation | Traffi c information | Radio mode
?
for approx. 2 sec-

Traffi c information

In the reception area "EUROPE", an FM station can
identify traffi c reports by means of an RDS signal.
If priority for traffi c reports is switched on, a traf-
fi c report is automatically switched through, even
if the car sound system is currently not in radio
mode.
If priority is switched on, the display shows the
traffi c jam symbol (
during a switched-through traffi c announcement.
The priority is activated and deactivated in the
user menu (see the chapter "User settings", sec-
tion "Making settings in the "TUNER" menu", menu
item "TRAFFIC").
Notes:
• The volume is increased for the duration
of the switched-through traffi c announce-
ment. You can adjust the minimum volume
for traffi c announcements (see the chapter
"User settings", section "Making settings in
the "VOLUME" menu", menu item "TRAFFIC
VOL").
• To cancel a switched-through traffi c an-
nouncement, press the SRC button

Radio mode

RDS

Many FM stations broadcast an RDS (Radio Data
System) signal in addition to their programme
in the reception area "EUROPE" that allows the
following additional functions:
• The station name is shown on the display.
• The car sound system recognises traffi c an-
nouncements and news broadcasts and can
automatically switch them through in other
operating modes (e. g. in CD mode).
• Alternate frequency: If RDS is activated, the car
sound system automatically selects the best
receivable frequency for the station that is cur-
rently set.
). "TRAFFIC" is displayed
>
.
29