Tabla de contenido
Enlaces rápidos
EN Operator's manual
Read these instructions carefully and make sure you understand them
before using PP 325 E.
ES Manual de Instrucciones
Antes de utilizar PP 325 E lea bien el manual de instrucciones hasta
PP 325 E -
comprender su contenido.
DE Bedienungsanweisung
Softstart
Lesen Sie die Bedienungsanweisung sorgfältig durch und machen Sie sich
mit dem Inhalt vertraut, bevor Sie PP 325 E benutzen.
FR Manuel d'utilisation
EN ES DE FR
Lire attentivement et bien assimiler le manuel d'utilisation avant de se
servir PP 325 E.
HUSQVARNA CONSTRUCTION PRODUCTS
Tabla de contenido
Manuales relacionados para Husqvarna PP 325 E-Softstart
Resumen de contenidos para Husqvarna PP 325 E-Softstart
- Página 1 Lesen Sie die Bedienungsanweisung sorgfältig durch und machen Sie sich mit dem Inhalt vertraut, bevor Sie PP 325 E benutzen. FR Manuel d’utilisation EN ES DE FR Lire attentivement et bien assimiler le manuel d’utilisation avant de se servir PP 325 E. HUSQVARNA CONSTRUCTION PRODUCTS...
- Página 2 Read the entire operator's manual Read, understand and follow all warnings and Always wear eye and ear protectors when before using or servicing this unit. instructions in this manual and on the unit. using this unit. Lea, comprenda y siga todas las advertencias y demás instrucciones de este manual y las Antes de utilizar o hacer el servicio Utilice siempre protecciones para los ojos y...
-
Página 3: Introducción
El PP 35 E es un grupo energético electro-hidráulico destinado principalmente a la sierra de pared WS 35, al motor de taladro Husqvarna DM 405 HH y a la sierra de mano Husqvarna HH 70. No obstante, el grupo también es adecuado para la propulsión de otros equipos del ramo;... - Página 4 NOTE! This manual covers the hydraulic portion of the power pack. For service not described in this manual, please contact an authorized dealer. WARNING! Under no condition should this power pack be modified from its original design without permission from the manufacturer.
- Página 5 Index Introduction ________________________________________________________ Warnings and safety instructions _______________________________________ 3,5 What is what? ______________________________________________________ 9 Technical data _____________________________________________________ 0 Before your Hydraulic Power Pack is put in use ___________________________ Power Pack couplers ________________________________________________ 3 Before Starting _____________________________________________________ 4 Starting procedure __________________________________________________ 5 After the job is done _________________________________________________ 6 Transport _________________________________________________________ 7 Maintenance ______________________________________________________ 7...
-
Página 6: General Safety Precautions
Great importance has been attached to efficiency, ease of use as well as safety during the design and manufacture of Husqvarna’ products. However, in order for the machine to remain safe some issues need to be observed: . Working near electrical lines. -
Página 7: Warn- Und Sicherheitshinweise
Warn- und Sicherheitshinweise Bei der Konstruktion und Herstellung von Husqvarna Produkten wurde größter Wert darauf gelegt, dass diese nicht nur möglichst effektiv und einfach zu handhaben, sondern auch sicher sind. Damit das Gerät auch sicher bleibt, sind bestimmte Dinge zu beachten: . -
Página 8: Instrucciones Generales De Seguridad
Instrucciones generales de seguridad En el diseño y fabricación de los productos Husqvarna se concede una importancia suma a que, además de ser eficaces y fáciles de usar, también sean seguros. Para mantener la seguridad de la máquina, deben tenerse en cuenta varios aspectos. -
Página 9: Consignes Générales De Sécurité
Consignes générales de sécurité Lors de la construction et de la fabrication des produits Husqvarna, une attention toute particulière a été portée à leur sécurité d'utilisation, en plus de leur efficacité et de leur simplicité de manipulation. Certaines consignes doivent être prises en compte afin que la machine reste sûre:... - Página 10 Fig. What is what? Teilebezeichnung . Rack for hydraulic hoses . Bügel für Hydraulikschlauch . Hydraulic system pressure gauge .Druckölmanometer 3. Oil level gauge 3. Ölmesser 4. Hydraulic oil tank 4. Tank, Hydrauliköl 5. Drain plug hydraulic oil 5. Ablaßschrauben, Hochdrucköl 6.
-
Página 11: Technical Data
Fig. 2 Fig. 3 Technical Data Motor _________________________________ Electrical 380 – 420 V, 16 A, 50 Hz Flow __________________________________ Max 40 litres/min (10 gpm) Hydraulic Tank Capacity __________________ 12 litres (3,2 US gallons, 2.6 UK gallons) Cooling _______________________________ Water via separate hose Dimensions ____________________________ W = 575 mm, H = 1040 mm, L = 780 mm, (W = 23", H = 41", L = 31") Weight (dry) ____________________________ 93 kg (205 lbs dry) Datos técnicos... - Página 12 Fig. 4 Fig. 5 Noise level acc. to ISO/DIS 11201 __________ Sound pressure at operator's ear no load 80 dB(A), full load 83 dB(A). Noise emmissions acc. to Directive 2000/14/EC ____________________________ Measured noise level 94 dB(A). Guaranteed noise level 99 dB(A) Hose length (1/2"...
-
Página 13: Ölstand Kontrollieren
Fig. 7 Fig. 6 Before your Hydraulic Power Pack is put in Inflate tires. Check tires for proper inflation; 2 bar (30 psi). Check the oil level The unit is delivered with 12 litres of hydraulic oil, viscosity 46 cSt HSH, of a well-known brand. The oil is an environmentally adapted, Swedish Testing and Research Institute approved ester oil, which significantly reduces the risk of allergic reactions or skin irritation in the event of any... - Página 14 Fig. 9 Fig. 8 Connections Wipe away any dirt from the hydraulic hoses’ quick- Connect a water hose between the upper radiator connectors and connect them. The connectors are locked connection on the hydraulic oil tank and the tool; and by turning the outer ring on the female connector so that the connect a hose from the closest water source to the track moves away from the ball.
-
Página 15: Before Starting
Fig. 10 Fig. 11 Before Starting Hydraulic oil Electrical Connection Check the level at the sight glass on tank. Connect the incoming electrical cable (16 A). This must be a three-phase, earthed cable. A neutral wire is also Minimum level = red line. needed for the single-phase outputs on the electrical Maximum level = black line. -
Página 16: Starting Procedure
Fig. 12 Starting procedure 1. Start the electric motor. Turn the switch to the ”Y” position in the direction indicated by the lit green lamp. The motor’s direction of travel will then be correct. Procedimiento de arranque 1. Poner en marcha el motor eléctrico. Girar el conmutador a la posición “1”, en la dirección indicada por la lámpara verde. -
Página 17: After The Job Is Done
Fig. 14 Fig. 15 2. Adjust the water faucet to a water flow suitable for the After the job is done appropriate tool. 1. Turn off the electric motor. Even if the tool does not require water, cooling water 2. Let the motor come to a complete stop. shall still flow through the radiator and thereafter to the 3. - Página 18 Fig 16 Transport Maintenance The power unit is designed as a cart offering the possibility Tightening torque to hang the hydraulic hoses for easy movement between During repair and maintenance that requires dismantling sites. with subsequent reassembly and tightening of bolts the following tightening torque should be used: When transporting between sites, the power unit is stored horizontally with the distribution box upwards.
-
Página 19: Hydraulic Oil
Fig. 17 Fig. 18 Hydraulic oil The hydraulic oil should be changed as needed or once Hydraulic oil is filled through the filter at the front of each year. the tank. Position the unit with the filter housing turned upwards. Remove the filter housing cover by removing The oil draining plug is at the bottom of the oil tank. -
Página 20: Limpieza
Fig. 20 Fig. 19 Hydraulic oil filter Cleaning The filter shall be changed twice yearly. Position the unit Clean the unit regularly by wiping it with a cloth. with the filter housing turned upwards. Remove the filter housing cover by removing the three screws. Lift up the filter WARNING cartridge. -
Página 21: Ec-Declaraton Of Conformity
Assurance de conformité CE Husqvarna Construction Products Sweden AB, Box 2098, SE-550 02 Jönköping, Suède, tél. : +46 36-570 60 00, certifie par la présente que le groupe d’alimentation PP 325 E, à partir des numéros de série 01001 et ultérieurs, est fabriqué conformément à la directive du Conseil 98/37/ CE sur les machines, à... - Página 22 www.husqvarnacp.com 115 04 20-20 2006-12-15...