Symbols On The Battery Charger; Operating States/Error Signals; Signals For Operating States; Warnings/Error Signals - Ottobock Kenevo 3C60 Instrucciones De Uso

12.1.2 Symbols on the battery charger

In some jurisdictions it is not permissible to dispose of these products with unsor­
ted household waste. Disposal that is not in accordance with the regulations of
your country may have a detrimental impact on health and the environment. Please
observe the instructions of your national authority pertaining to return and collec­
tion.
Declaration of conformity according to the applicable European directives
Lot number
Protect from moisture
Protection against penetration of solid foreign objects with a diameter greater than
12.5 mm, no protection against water

12.2 Operating states/error signals

The prosthesis indicates operating states and error messages through beeps and vibration sig­
nals.

12.2.1 Signals for operating states

Battery charger connected/disconnected
Beep signal
1 x short
1 x short

12.2.2 Warnings/error signals

Error during use
Beep signal
Vibration signal
None
3 x short
1x before beep signal Battery charger disconnected after start of char­
Vibration signal
1x long at interval of
approx. 5 seconds
3 x long
5 x long
Event
Battery charger connected or
battery charger already disconnected prior to
start of charging mode
Charging mode started (3 sec. after connecting
the battery charger)
ging mode
Event
Overheated hydraulic
unit
Battery charge level
under 35%
Battery charge level
under 20%
Required action
Reduce activity.
Charge battery soon.
Charge battery immedi­
ately; the product will be
switched off after the next
warning signal.
55