Skil 2211 Manual De Instrucciones página 23

SCREW BIT IDENTIFICATION AND STORAGE
(Figure 15)
Identifies and stores the right bit for a flawless
screw driving job
HOLDING AND GUIDING THE TOOL (Figure 16)
Keep ventilation slots J 2 uncovered.
Do not apply too much pressure on the tool; let
the tool do the work for you.
Application advice
USE THE APPROPRIATE BITS (Figure 17)
Only use sharp bits.
When drilling ferrous metals:
- Pre-drill a smaller hole, when a large hole is
required.
- Lubricate drill bit occasionally with oil.
When turning in a screw at/near the cross cut end
or an edge of wood, pre-drill a hole in order to
avoid cracking of the wood.
For an optimal use of the tool a steady pressure
on the screw is required, especially while
removing
When screwdriving in hard wood one should pre-
drill a hole.
• Splinterfree drilling in wood (Figure 18).
• Dustfree drilling in walls (Figure 19).
• Dustfree drilling in ceilings (Figure 20).
• Drilling in tiles without skidding (Figure 21).
• For more tips see www.skileurope.com
Maintenance
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as
during transport and storage, remove the
battery from the power tool. There is danger
of injury when unintentionally actuating the
On/Off switch.
Unplug charger from power source before
cleaning.
For safe and proper working, always keep the
machine and the ventilation slots clean.
Keep tool and charger clean.
- The charger may be cleaned most effectively
with compressed air (wear safety goggles).
- Clean charging contacts in charger with alcohol
or contact cleaner.
If the machine should fail despite the rigorous
manufacturing and testing procedures, repair
should be carried out by an authorized customer
services center for SKIL Power Tools.
Guarantee
We guarantee SKIL appliances in accordance with
statutory/country-specific regulations (proof of
purchase by invoice or delivery note).
Damage attributable to normal wear and tear,
overload or improper handling will be excluded
from the guarantee.
In case of complaint please send the machine,
undismantled, to your dealer or the customer
services center for SKIL Power Tools.
Warning! Freight and insurance costs are
charged to the client, even for warranty claims.
After-sales Service and Customer
Assistance
Our after-sales service responds to your questions
concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be found
under:
www.skil.com
Our customer consultants answer your questions
concerning best buy, application and adjustment
of products and accessories.
Environment
Recycle raw materials instead of disposing as
waste.
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
Do not dispose of electric tools, accessories
and packaging together with household waste
material
The plastic components are labeled for
categorized recycling.
Battery packs/batteries:
Do not dispose of battery packs/batteries into
household waste, fire or water.
Battery packs/batteries should be collected,
recycled or disposed of in an environmental-
friendly manner.
The nickel-cadmium battery must be kept
separate from the natural environment and should
not be disposed of as normal domestic. Do not
use tool or charger when damaged; take it to one
of the officially registered SKIL Service Stations
for a safety check.
The figure 7 will remind you of this when the need
for disposing occurs.
Subject to change without notice
23