Electric Brake - RIDGID R4210 Manual Del Operador

FEATURES
KNOW YOUR COMPOUND MITER SAW
See Figures 1 - 2.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
10 in. BLADE
A 10 in. blade is included with the compound miter saw. It will
cut materials up to 3-1/2 in. thick or 12 in. wide, depending
upon the angle at which the cut is being made.
BEVEL DETENT LEVER
See Figure 3.
Loosen the bevel lock knob before using the bevel detent lever.
Tighten the knob after adjusting to lock the saw in place.
POSITION 1: (detent disengaged) Allows the blade to be
freely tilted either left or right for custom selection of bevel
cuts.
POSITION 2: (detent engaged) Allows you to easily find 0°,
15°, 22.5°, 33.9°, and 45° at indexed stops.
BEVEL LOCK KNOB
See Figure 3.
The bevel lock knob securely locks your compound miter
saw at desired bevel angles. Loosen the bevel lock knob to
release the saw, allowing the blade to be tilted either left or
right for bevel cuts. Tighten the knob to lock the saw in place.
CARRYING HANDLES
See Figure 4.
Carrying handles are located on the top of the saw arm
(D handle), at the top of the slide housing, and on the sides
of the saw base.
To transport: turn off and unplug the saw, lower saw arm
and lock it in the transport position, lock bevel and miter
lock levers, lock slide lock knob.
CROWN AND BASEBOARD SETTING LEVER
See Figure 2.
The crown and baseboard setting lever is helpful when mak-
ing miter cuts between 45° right and 45° left for tall crown
molding and vertical baseboard.
DEPTH CONTROL KNOB
See Figure 4.
The depth control knob is a guide for limiting downward
movement of the saw arm.
NOTE: Controlling depth of cut is necessary when rough
cutting a dado.

ELECTRIC BRAKE

An electric brake quickly stops blade rotation after the switch
trigger is released.
BEVEL
DETENT
LEVER
TIGHTEN
"D" HANDLE
MITER
DETENT
BYPASS
BUTTON
MITER
DETENT
OVERRIDE
LEVER
SIDE HANDLE
AREA
11 - English
BEVEL
ARM
BEVEL
LOCK KNOB
1
LOOSEN
2
DEPTH CONTROL
KNOB
HEAD
LOCK PIN
Fig. 3
CARRYING
HANDLE
Fig. 4