Initial Setup - Dremel Idea Builder 3D40 Instrucciones De Funcionamiento

DM 2610039151 01-16_3D40 1/7/16 9:33 AM Page 21
The first time you power on your Dremel
3D40 you will be prompted to perform an
initial setup of network, cloud services, and
printer registration. Completing this process
will give you access to features such as
printing wirelessly from your PC or Dremel3D
mobile app, printer sharing amongst your
friends and family, notifications of firmware
updates, and printer status monitoring.
NOTE: Dremel3D mobile app can be
downloaded from the app stores for iOS or
Android.
1. To complete initial setup, tap "Yes" when
prompted on the initial setup screen. If you
decline this setup you can always setup
network and register later.
2. If you choose
automatically connect to your ethernet (if
plugged into router skip to step 5) or
search for available wireless networks.
3. Choose your wireless network using the
touchscreen. Use the arrows to scroll
through the list of available wireless

Initial Setup

"Yes", 3D40 will
21
networks. When your wireless network
name is highlighted, tap "Accept".
4. Enter your wireless network password and
tap "Accept".
5. Tap "Yes" to register your 3D40 and write
down the token displayed at the bottom of
the touchscreen. This token will be used
to link your 3D40 to your Dremel3D.com
account.
6. Tap "Done" to complete the initial setup
process on your printer.
7. Visit Dremel3D.com or launch the
Dremel3D mobile app and follow the
prompts to complete your user profile
creation and 3D40 registration.