Initial Setup - Dremel 3D45 Traducción De Las Instrucciones Originales

INITIAL SETUP

The first time you power on your Dremel 3D45 you
will be prompted to perform an initial setup of network.
Completing this process will give you access to
features such as printing wirelessly from your PC
or Dremel3D cloud based program, printer sharing
amongst your friends and family, notifications of
firmware updates, and printer status monitoring. You
will then be walked through how to loading your first
roll of filament and how to properly level the build
platform.
NOTE: Dremel 3D cloud based software can be
accessed on www.dremel3d.com. The availability of the
cloud based software may depend on your region.
1. To complete initial setup, tap "Start" when prompted
on the initial setup screen. If you decline this setup
you can always setup network later.
2. If you choose "Start", 3D45 will automatically
connect to your ethernet (if plugged into router skip
to step 5) or search for available wireless networks.
3. Choose your wireless network using the
touchscreen. Use the arrows to scroll through the
list of available wireless networks. Tap on your
network name to accept it.
4. Enter your wireless network password and tap
"Done".
5. Write down the token displayed at the bottom of
the touchscreen. This token will be used to link
your printer to your Dremel account.
6. Visit Dremel3d.com and follow the prompts to
complete your user profile creation and printer
registration.
17