Disposal Information - Bosch BSG 8 Serie Instrucciones De Uso

Disposal information

Packaging
The packaging is designed to protect the vacuum
cleaner from being damaged during transportation. It
is made of environmentally friendly materials and can
be recycled.
Dispose of packaging that is no longer required at an
appropriate recycling point.
Used vacuum cleaners
Used vacuum cleaners still contain many valuable
materials. Therefore, please take your used vacuum
cleaner to your retailer or recycling centre to be
recycled. For current disposal methods, please
enquire at your retailer or your local council.
Disposal of filters and dust bags
Filters and dust bags are made from environmentally
friendly materials.
As long as they do not contain substances that are
not permitted to be disposed of in the household
rubbish, you can dispose of them with your normal
household rubbish.
!
Please note
The mains socket must be protected by at least a 16
amp fuse.
If a fuse should blow when you switch on the
appliance, this may be because other electrical
appliances which have a high current draw are
connected to the same power circuit.
To prevent the fuse from blowing, select the lowest
power setting before switching the appliance on, and
increase the power only once it
is running.
10
Fold out picture pages.
Set-up
1
Figure
a)Insert the flexible hose adapter into the air intake
opening and allow it to engage.
b)To remove the flexible hose, press the two lugs
together and pull the hose out.
2*
Figure
a)Connect the handle and the telescopic tube
together.
b)Push the handle into the telescopic tube until it
engages.
To release the connection, squeeze the locking
collar and pull the handle out.
3*
Figure
Attach the carpet lifter to the nozzle.
Press the carpet lifter sideways to engage.
4*
Figure
a)Align and connect the floor tool and the telescopic
tube.
b)Push the telescopic tube straight into the connect-
ing piece of the floor tool until it engages.
Press on the locking collar and pull out the telescop-
ic tube to disconnect.
5*
Figure
Press the adjusting sleeve in the direction of the
arrow and adjust the telescopic tube to the length
required.
6
Figure
Fasten the accessory holder to the suction pipe and
insert the combination tool from above.
7
Figure
Holding the power cord by the plug, pull out the
required length and plug it into the mains socket.
8
Figure
To switch your vacuum cleaner on and off, press the
ON/OFF button in the direction of the arrow.
The blue indicator in the filter status area lights up,
indicating that the appliance is ready to use.
* Dependent on model
en