Playback; Using Time Check To Check Your Recorded Performance - Roland V-Drums TD-4KP Manual Del Usuario

2. Hit any pad/pedal and recording begins.
The following screen appears.
fig.d-Rec-2.eps
3. To stop recording, press the [
the button goes dark.
* If you exceed the maximum recording time, recording stops
automatically.
fig.d-Rec-3.eps

Playback

fig.P-QuickPlay.eps
1. Press the [ ] (Play/Stop) button so it's lit.
The following screen appears, and playback begins.
fig.d-RecPlay-1.eps
* The recorded performance data is not transmitted from MIDI
OUT.
By holding down the [
one second, you can select loop playback; the recorded
performance will play repeatedly.
fig.d-LoopPlay.eps
Loop Playback
] (Rec) button and
1, 2
] (Play/Stop) button for about
2. To stop playback, press the [
button and the button goes dark.
When playback has finished, the [
button automatically goes dark.
Using Time Check to Check Your Recorded
Performance
You can use Coach mode's "TIME CHECK" function to check
whether your recorded performance was played with accurate
timing.
You must play along with the metronome when recording.
1. Press the [ ] (Play/Stop) button so it's lit; the
recorded performance will play.
2. Press the [COACH] button.
The following screen appears.
fig.d-RecCheck.eps
During playback, you can change the playback tempo by
turning the [-/+] dial. When you stop playback, the tempo will
revert to the setting at which it was recorded.
* Loop playback will automatically be selected and the
metronome will turn on.
3. To stop playback, press the [
button and the button goes dark.
Practicing
] (Play/Stop)
] (Play/Stop)
] (Play/Stop)
17