Stihl SR 430 Manual De Instrucciones página 31

4
Thoroughly clean the plastic pins
N
and the sealing face on the solution
container – check that there is no
residue.
Thoroughly clean the holes and
N
sealing face on the metering unit (4)
– check that there is no residue.
Fit the solution tank on the metering
N
unit's housing (4).
5
Hook the lever (3) over the bar (5)
N
on the solution container.
SR 430, SR 450
3
6
6
2 2
Press the levers (3) down until the
N
tabs (2) snap into their seats (6) on
the housing with a loud click.
Check that the container is firmly
N
seated.
Blower tube
1
Insert a screwdriver into the tab (1)
N
of the hose clamp (2) on the control
handle.
Turn the screwdriver clockwise to
N
loosen the hose clamp (2).
Pull the hose (3) off the stub.
N
3
6
Rotate the nozzle (4) until the
N
lugs (5) are covered.
Pull the nozzle (4) off the blower
N
tube (6).
Converting back to misblowing mode
The conversion is carried out in the
reverse sequence.
Fitting the hose
2
Push the hose with clamp (2) over
N
the stub on the control handle.
3
Use pliers to squeeze the hose
N
clamp together (2) until the retaining
strip engages and locks.
English
4
6
5
2
29