Redmond RMC-M90A Manual De Usuario página 21

VI. BEFORE CONTACTING A SERVICE CENTER
Error code
System error. System board or heating element
Е1 – E3
malfunction.
Problem
The appliance does not switch on.
Voltage supply failure.
Voltage supply interruption.
There is a foreign object between the bowl and
the heating element.
The meal is taking too long to cook.
The bowl was installed with a distortion.
The heating element is dirty.
The packaging, user manual, and the device itself may not be treated as household waste. Instead, it shall be taken to the applicable collection point for the
recycling of electrical and electronic equipment.
© REDMOND. All rights reserved. 2015
Reproduction, transfer, distribution, translation or other reworking of this document or any part thereof without prior written permission of the legal
owner is prohibited.
Error description
Unplug the appliance and let it cool down. Close the lid tightly. Switch the appliance
back on. If this does not eliminate the error, address an authorized service center.
Possible cause
Check the voltage supply.
Remove the foreign object.
Install the bowl evenly, without any distortion.
Unplug the device and let it cool down. Clean the heating element.
RMC-M90A
Error handling
Solving the problem
ENG
21