Tabla de contenido
BLUETOOTH
a
You can wirelessly enjoy music files stored in a
smartphone or other BLUETOOTH-enabled device.
The coverage area is about 33 feet (10 meters).
0 Note that connection is not always guaranteed with all
BLUETOOTH-enabled devices.
1. Press BLUETOOTH (a).
2. Enable (turn on) the BLUETOOTH function of the
BLUETOOTH-enabled device.
3. On the screen, etc., of the BLUETOOTH-enabled
device, select "Onkyo AV Receiver". After a short
time "CONNECT" is displayed and pairing is
completed.
0 If a password is requested, enter "0000".
4. Play some music on the BLUETOOTH-enabled
device. Increase the volume of the BLUETOOTH-
enabled device to an appropriate level.
Playing a USB Device
a
Play music files on a USB storage device. This unit
supports play of WMA/MP3/MPEG-4 AAC music
files.
b
0 Note that operation is not guaranteed with all USB
storage devices.
1. Switch the input on the TV to that assigned to the
c
unit.
2. Press USB (a).
3. Connect the USB storage device to the USB port
on the main unit.
0 Play of the first file starts automatically when the USB
4. To play another file, press
of files and folders on the TV, then use the cursors
to select and ENTER to confirm (c).
0 If characters that cannot be read are recorded on the
14
®
Playback
storage device is detected.
(b) to display the list
USB file, they are replaced with
marks.
About Listening Modes
The default setting is for the All Ch Stereo mode to be
selected which plays a stereo image from the front
a
and rear, irrespective of the input audio format.
SURR button (a)
You can select the Dolby Digital and DTS listening
modes. When the input signal is multi-channel, the
listening mode switches to Dolby Digital or DTS-HD
d
MasterAudio, for example, to suit the input audio
c
format. When the input signal is 2-channel, you can
select the DOLBY PLII MOVIE/MUSIC/GAME and
b
NEO:6 CINEMA/MUSIC listening modes which
expand playback to 5.1 channels.
DIRECT button (b)
You can select the DIRECT mode that shuts down
circuits and processing that affect sound quality, such
as the tone control circuits. In this case, speakers
play the sound field according to the number of
channels in the input signal, so there would be output
from only the front speakers for a 2-channel signal,
for example.
e
STEREO button (c)
You can select the STEREO mode to playback only
from the front speakers and subwoofer.
DSP button (d)
You can select original surround modes such as the
All Ch Stereo and TV Logic modes.
Tabla de contenido
