Preparing For Use; Filling The Clean Water Tank - Philips AquaTrio FC7070/01 Manual Del Usuario

4 Preparing for use

4.1 Filling the clean water tank

Fill the clean water tank before every use.
A full clean water tank provides enough water to
clean a surface area of more than 60m².
Place the appliance in upright position. It
1
automatically locks in parking position ('click').
Turn the cord storage hook downwards and
2
remove the cord to gain proper access to the
back of the appliance.
Pull up the lever to unlock the clean water
3
tank and remove the clean water tank. To
prevent the appliance from toppling over,
hold it upright with one hand and remove the
clean water tank with your other hand.
Turn the cap of the clean water tank
4
anticlockwise and remove the cap from the
clean water tank.
Fill the clean water tank with cold or
5
lukewarm tap water up to the MAX
indication. If you wish, you can add a few
drops of a suitable liquid floor cleaner
(see chapter 'Important', section 'Floor
maintenance').
Note:
D
If you want to use a liquid floor cleaner, first
fill the clean water tank with water. Then add
the quantity of liquid floor cleaner indicated
on the bottle. As the clean water tank has a
capacity of 700ml, you only have to add a few
drops.
9