Cleaning The Mopping Nozzle - Philips AquaTrio FC7070/01 Manual Del Usuario

Slide the mopping nozzle lid release slide in
7
the direction of the arrow (1) and open the
mopping nozzle lid (2). Remove the mopping
brush cover (3) and check if the inside is clean.
If the inside is clean, see chapter 'Storing and
moving your AquaTrio' for instructions on
how to store the appliance. If the inside of
the mopping brush cover and the mopping
brushes are still dirty, follow the instructions in
section 'Cleaning the mopping nozzle' to clean
the mopping nozzle.
If necessary, clean the flushing tray under the
8
tap and dry it with a cloth. You can also clean
the tray in the dishwasher.
6.2 Cleaning the mopping
nozzle
Switch off the appliance, place the appliance
1
upright in parking position ('click') and pull the
plug out of the wall socket.
Open the mopping nozzle lid.
2
Pull at the handgrip and remove the mopping
3
brush cover. To prevent your hands from
getting dirty, lift the mopping brushes out of
the mopping nozzle by their lime green grips.
Tip:
E
Place the dirty mopping brushes on the mopping
brush cover and carry them to the sink.
Clean the mopping brushes by rinsing them
4
under the tap. If you want, you can use a liquid
household cleaner or some washing-up liquid
to clean the mopping brushes.
Clean the mopping brush cover under a tap.
5
15