Instruction Manual - Makita DUP361 Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Max. cutting capacity
Overall length (shears part)
Rated voltage
Battery cartridge
Net weight (with shears, switch box, connection cord, two battery
cartridges and back pack)
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Do not expose to moisture.
Danger; be aware of thrown objects.
Keep bystanders away.
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for pruning twigs or branches.
Noise
The typical A-weighted noise level determined accord-
ing to EN50636:
Sound pressure level (L
Uncertainty (K) : 3.2 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
Wear ear protection.
) : 70 dB(A) or less
pA
BL1815N, BL1820, BL1820B
3.3 kg
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN50636:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
Pruning shears safety warnings
WARNING:
Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
8 ENGLISH
DUP361
33 mm
305 mm
D.C.36 V
BL1830, BL1830B, BL1840,
BL1840B, BL1850, BL1850B,
BL1860B
3.8 kg
2
) : 2.5 m/s or less
h
2