Parking Brakes - Vermeiren Albatros Manual De Instrucciones

N

2.3.2 Parking brakes

2.3.3 Foot plate
2.3.4 Leg support
L
WARNING: Risk of injury – Do not drop the leg support on the patient when
adjusting.
The leg supports can be adjusted in depth and 5 different heights.
2
2
1
2
1
3
1 = Bar for height adjustment
1
2 = Lever for depth adjustment
Secure the two casters at the back of the
chassis by pressing the caster brake plates
down gently to their end stops with the tip of
your foot. To release the brake, push the brake
plate gently back up again with the front of your
foot until the casters are free.
The footplate  can be mounted or
removed with the hooks  to/from the
chassis of the patient hoist. On the
footplate  the patient can be stand with
his feet.
The leg support  can be mounted on the
bar of the patient hoist  with the safety pin
.
The leg support is meant to keep the legs
of the patient in the correct position and to
support the legs of the patient during stand
up.
Height from footplate to
top of leg support
520 mm
495 mm
470 mm
445 mm
420 mm
Table 2: Height adjustment leg support
Page 10
Albatros
2010-12
Position
Hole 1
Hole 2
Hole 3
Hole 4
Hole 5