Accessing The Voicemail; Accessing The Voicemail Of Another Extension Or Outside The Pbx System; Listening To The Messages - Intelbras Impacta 16 Manual Del Usuario

4.2. Accessing the voicemail

To access the voice mail from a conventional phone in DTMF mode, dial #87, wait for
the greeting, and dial your password. To access a Smart Terminal, use the Mail key.
The command: #87 + voice mail password
Default manufacturing password key: 1234.
Note: during your first access you will be requested to change the default password.
4.3. Accessing the voicemail of another extension or outside the
PBX system
To call from a extension with category, dial #87 + + your extension number +
*
voice mail password.
This operation can also be done out of the PBX system.
To call the voice mail during the greeting, dial the voice mail number + + extension
*
number + voice mail password.
To call from an external number with DISA, during the DISA greeting, dial #87 +
password.
To call from an external number through E1, dial the voice mail DDR.
Note: the commands for these items are not accepted during the customized gre-
eting. In this case, follow with the command during the greeting "After the tone,
please leave your message."

4.4. Listening to the messages

In order to listen to new messages, dial #87 + voicemail password + 4
After listening to the voicemail messages, dial # as the message is shown to skip to
the next message.
You cannot listen to the new messages only. You should delete all the other listened
messages to avoid listening to them again each time to access your voicemail.
Dial 3 after listening to a message to delete it.
The amount of messages spoken by the mailbox is of up to 59 messages. For instan-
ce: You have 20 messages.
Above this amount of messages, the mailbox will only tell you "You have messages."
27