Shipping And Storage; Care; Plastic Parts - Vermeiren Charme Manual De Instrucciones

Every 8 weeks: inspected and lubricating or adjusting from
•
Tilt mechanism
ƒ
Adjusting mechanism (seat height, hand grips)
ƒ
Every 6 months or for every new user
•
General review
ƒ
Cleanness, Disinfection
ƒ
Function of the wheels: If the rotation resistance is too large, clean the
ƒ
bearings of the steering wheels. If this is insufficient, please consult your
specialist dealer.
For your convenience, on the back of this manual is a maintenance plan.
Repairing and assembling of spare parts for your chair may only be performed by the
specialist dealer.
Only authorized Vermeiren spare parts may be installed.
4.2

Shipping and storage

The shipping and storage of the product shall be according following instructions:
Store in a dry place (between +5 ° C and +41 ° C).
•
The relative humidity of the air should be between 30% and 70%.
•
Provide sufficient covering or packaging to protect the product from rust and foreign
•
bodies. (e.g. salt water, sea air, sand, dust).
Store all removed parts together in one place (or mark them if necessary) to avoid
•
mixing up with other products when re-assembling.
Components must be stored without being subjected to strains (Do not put too heavy
•
parts on the chair, not clamping between something, ...).
4.3

Care

4.3.1 Covers
The cleaning of the cover shall be according:
ƒ Clean covers with a cloth moistened with hot water. Be aware that you do not soak
the cover.
ƒ Use a mild commercial detergent for removing stubborn dirt.
ƒ Stains can be removed by using a sponge or a soft brush.
ƒ Do not use strong cleaning liquids like solvents, nor use hard brushes.
ƒ Never clean with steam and/or pressure washers.

4.3.2 Plastic parts

Clean plastic parts of your chair with commercial plastic cleaners. Only use a soft brush or
soft sponge. Please comply with special product information.
Examples of plastic parts are tyres, protection on the attachment leg support.
4.3.3 Coating
The high quality of the surface layer guarantees optimal protection against corrosion. If the
outer coat is damaged by scratching or in some other way, get your specialist dealer to
repair the affected surface.
When cleaning, only use warm water and normal household detergents and soft brushes
and cloths. Ensure that no wetness gets into the tubes.
Initially the zinc parts only require rubbing with a dry cloth. Stubborn dirt can best be
removed by using a suitable commercial zinc polish.
ƒ‰‡
Charme
2011-09