Stihl MS 291 C-Q Manual De Instrucciones página 28

English
5
N Fit the nut (5) and screw it by hand
onto the headless pin as far as it will
go
Releasing the chain brake
N Release the chain brake by pushing
the hand guard (9) against the front
handle
26
Fitting the saw chain
9
Put on protective gloves – risk of
injury by the sharp cutters
N Fit the saw chain – starting at the
nose of the guide bar – pay attention
to the position of the tensioning gear
and the cutting edges
N Turn tensioning gear (4) to the right
as far as possible
N Turn the guide bar so that the
tensioning gear faces the user
N
N
4
N
N
11
10
Place the saw chain on the chain
sprocket (10)
Position guide bar – the long middle
mounting stud (11) protrudes
through the hole in the tensioning
gear – the heads of the two short
mounting studs protrude into the
oblong hole of the guide bar
Press the throttle trigger lockout to
release the chain brake
Guide the drive link into the bar
groove (see arrow) and turn the
tensioning gear to the left as far as
possible
MS 291 C-Q