Receiving The Memorised Stations; Storing The Station Names; Station Memo - Sony CDX-C410 Manual De Instrucciones

Receiving the memorised
stations
1
Press (SOURCE) repeatedly to select the
desired band.
2
Press the number button ((1) to (10))
momentarily where the desired station is
stored.
If you cannot tune in a preset
station
Press either side of (SEEK/AMS)
momentarily to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Press either side of (SEEK/AMS)
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(SHIFT), then press (3) (PLAY MODE) repeatedly until
"LOCAL" (local seek mode) is displayed. Then press (4)
(n) to select "ON."
Only the stations with relatively strong signals will be
tuned in.
Tip
If you know the frequency of the station you want to listen
to, press and hold either side of (SEEK/AMS) for two
seconds until the desired frequency appears (manual
tuning).
If FM stereo reception is poor
— Monaural Mode
1
Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until "MONO"
appears.
2
Press (4) (n) repeatedly until "MONO-
ON" appears.
The sound improves, but becomes
monaural ("ST" disappears).
To go back to the normal mode, select
"MONO-OFF" in step 2 above.
Changing the displayed items
Each time you press (DSPL), the items
alternate between the frequency and time.
Actual total number:

Storing the station names

— Station Memo

You can assign a name to each radio station
and store it in memory. The name of the
station currently tuned in appears in the
display. You can store up to eight characters
for a station.
Storing the station names
1
Tune in a station whose name you want
to store.
2
Press (LIST) for two seconds.
FM1
SUR
EQ
3
Enter the characters.
1 Press (+) to select the desired
characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
FM1
SUR
W
EQ
If you press (–), the characters appear
in the reverse order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (4) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
FM1
SUR
W
EQ
If you press (1) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
4
To return to the normal radio reception,
press (LIST) for two seconds.
Tip
To erase/correct a name, enter "_" (under-bar) for each
character.
continue to next page n
E
Sony CDX-C410 ( ,S,C) 3-856-126-21(1)
EN
7