Audio Playback; Hands-Free Function; Battery Capacity - Hama Neckband Instrucciones De Uso

Note – Connection impaired
• Check whether obstacles are impairing the
range. If so, move the devices closer together.
• The performance can also be affected by a
weak battery.
5.3. Bluetooth multipoint connection
®
These earphones can connect to two Bluetooth
enabled terminal devices simultaneously (multipoint).
• First connect the earphones with the first terminal
device as described in 5.1.
• Then disable Bluetooth
• Next, connect the earphones with the second
terminal device as described in 5.1.
• Activate Bluetooth
®
more. The earphones now connect to that terminal
device automatically.

5.4. Audio playback

Note
• Note that the functions described under 5.3.
and 5.4. are only possible with an active
Bluetooth connection.
®
• Your terminal device must also support the
individual functions.
• For more information, please refer to the
operating instructions of your terminal device.
• Functions can still be controlled directly via the
terminal device.
• Set the volume on your terminal device to a
low level.
• Switch on the earphones with the MF button
(5). Upon successful connection, a voice says,
"Connected".
• Start audio playback on the connected terminal
device.
• Press Volume + (4) to increase the volume. There
is an announcement when the maximum volume
is reached.
• Press Volume - (6) to reduce the volume.
• Press the MF button (5) to start or pause audio
playback.
• Press and hold Jump forward one title (4) to
skip to the next title.
• Press and hold Jump backward one title (6) to
skip to the previous title.
4
on that terminal device.
®
on the first terminal device once

5.5. Hands-free function

• Press the MF button (5) once to answer an
incoming call.
• Press the MF button(5) twice or use your telephone
to reject an incoming call.
• During a call, press the MF button (5) once to
end the call.
• Press the MF button (5) twice to call the number
-
®
of the last call.
Note – Call quality
To increase the call quality, make sure that you
are near the earphones with your mobile phone
during the call.
5.6. Disconnecting the earphones
• Switch off the earphones.
• Disconnect the earphones via the Bluetooth
settings on your terminal device.

5.7. Battery capacity

• An announcement is made and the display flashes
in red when the battery is low
• Charge the earphones as described in 4. Getting
started.
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
Make sure that water does not get into the product.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have
any questions about this product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here:
www.hama.com
®