NOTE:
If the cables
have become
dis-
connected,
connect
cables
as shown
in
Figure
5.
Traction Drive Cable
Auger Drive Cable
Figure 5 =
HOW TO INSTALL
THE REMOTE CHUTE KNOB
1. Assemble the remote chute knob
onto the lever until snug against the
nut (see Figure 6).
2. Make sure lip on the remote chute
knob is pointed toward the engine.
3. Tighten the nut against the bottom of
the remote chute knob.
Lip _.
Nut
Knob
i1--'-----_ Lever
Figure 6
HOW TO INSTALL
THE SPEED SELECT KNOB
1. Assemble the speed select knob
onto the lever until snug against the
nut (see Figure 7).
2. Make sure lip on the speed select
knob is pointed toward the engine.
3. Tighten the nut against the bottom of
the speed select knob.
_
Lip
Speed Select
Knob
@ _
Nut
i
_
Figure 7
Lever
F-041074L
9